PROCESS HOW TO MAKE A MANY BRICK (PROSES CARA MEMBUAT BATU BATA SECARA MANUAL)

RAW MATERIAL TO MAKE BRICK
-Clay
-Water
-Ash

TOOLS FOR MAKING BRICKS
-Hoe -Printing Bricks
-Blind grinding machine
-Machinery / Combustion Furnace
-Fire / coal

PROCESS HOW TO MAKE A BRICK

1.First of all, planting a red soil-shaped land of hills and the texture of the soil is very clay, do not contain too much sand, this director's soil will reduce the strength of the bricks. Also close to the water source, as a mixture of red soil.

2.Furthermore, if it is obtained, clean the clay from the rest of the existing garbage such as small stones grass and so forth

3.Soak clay (clay) into a hole that you have created at least 15 hours or more depending on clay in your place

4.Then throw the air to dry, after that you must smooth the clay, can use the hoe. why must with a hoe? because this time we discuss and do it using manual techniques not with the machine, you can later develop again

5.Destroy the land by trampling the soil into mud. if on a scale enough to use the help of animals such as buffalo. do not get too soft because it will not be able to print

1. Then put the mud (clay) on the printed table

7.Setelah can be directly in print do not forget a bit of ash molded so as not sticky

8.When the clay is already square-shaped like a brick, you can do the drying

9.Tahap pemindingan goal for a fast dry brick can be done by piling the brick that still shaped the land before by tilting

10.Then when it is dry, the next step of stacking the bricks from the production plant to the kitchen pang

11.This handling of bricks is the steps that you can deliver or less successful at this stage will be done the cost of the kitchen where you work and its ordinary time is quite long, depending on the number of bricks you burn

STAIRS OF BRAIN RUBBER STEAM

1.The next step after the dry raw bricks are prepared in the prepared kitchen

2.After that you also have to prepare the fuel like wood or it could be with the remaining processed fruit oil palm tangkos, should be dried first so it is not easy

1. Then you just do the stages by inserting the wood into the hole under the arrangement of the brick earlier

4.Then we enter this ketahap around the arrangement of the stone's goal is the speed that is in the process of fast brick up and not forget to give husk (ex husk peeled rice) can be obtained dikilang rice. the fire is not to die or dim the day yasemakin must add rampant or dtambah its volume

1. Stage the cover of the fire pit so that no fire does not come out and the end of the peroses it can be done that smoke at the top of the composition of the brick was already silent or if we just see there is air that is burning

6.Still not yet finished, there is still finishing stage again that is peyiraman stage top of brick pond with husk (former leftover of rice husk) my suggestion put a bit thick of your brick perfectly

1. After that we continue with the opening stage of the wall that has been installed earlier, this is done about 24 hours after stage number 6. Its full length depends on the number of bricks you burn (eg 60,000 pieces of bricks, you need 6 days 6 night nonstop)

8.After being burned and then cooled, then the bricks are ready to be sold, usually a lot of orders from the furniture and individual buyers, with the price of one eye far between Rp.400 - Rp. 500 not include postage.

Please Follow My Account : @adeisramurazi