"Making glass from bamboo" - 18 February 2021

in Steem SEA4 years ago

"Making glass from bamboo" - 18 February 2021.

Assalamu'alaikum wr.wb..

Good morning and have a nice activity for steemians everywhere ..
Stay enthusiastic even in the midst of a pandemic that is still hitting the world. Stay healthy and
Don't forget to always wear a mask 😷 when traveling and adhere to health protocols, may Allah always provide health for all of us .. Aamiin yrb .. 🤲 😇
Today I will try to be creative in making glass 🥤 using bamboo, it just so happens that in my garden there are several types of bamboo trees that thrive and thrive, including

  • Bamboo Andong
  • Bamboo Betung
  • Bamboo Tali
  • Yellow Bamboo

PSX_20210218_163901_2.jpg

PSX_20210218_164858.jpg
My homemade bamboo glass

First of all we prepare the materials and what I am using now is the Andong type of bamboo, the advantages of this type of Andong bamboo are that it has a large bamboo segment and some even up to a diameter of 20cm to 25cm which is usually used as a pole to make bamboo house but currently what I use in making glass has a diameter of between 8cm to 10cm

Materials :

  • 1 bamboo carriage
  • wood saws
  • sandpaper (various sizes)
  • glue (power glue)

How to make :
Cut the bamboo with a length of 15cm from the base of the segment and in making this glass, we can only make the base of the glass, while for the remaining middle part, we can make materials for other creations, such as decorative lamps or bed lamps.
After that the bamboo that we cut earlier, we refine using sandpaper, use sandpaper with a coarser size at the beginning of grinding and for finishing use fine sandpaper to get better results. After that, prepare the bamboo strips for the glass stalk, from the remaining central piece of bamboo. Cut 2cm then cut the bamboo that we cut into 2 parts, then smooth it again with sandpaper.

PSX_20210218_181041.jpg
The bamboo pieces that we prepare

PSX_20210218_182205.jpg

PSX_20210218_182403.jpg
I use a sandpaper machine to make the job easier

After all the ingredients are finished we smooth them with sandpaper, then the next step is to attach the bamboo glass stalk to the side of the bamboo using glue (power glue) then smooth the glass stalk joints that were glued back using sandpaper.
When finished and to make it look prettier, we can paint the outside of the glass with spray paint or varnish to make it look more shiny.
The glass is finished ready to use ..

PSX_20210218_185125.jpg
The glass is finished ready to use ..

Thank you very much to @ steem.sea and team, hopefully @ steem.sea can become a steemit community forum for the nation's children 🇮🇩 🇮🇩 to be more creative and innovative in their work.
Greetings from me @ muhamad.dhoank.
Steemit Community Indonesia "The Rain City"

NO📸 PICTURESMARTPHONE
1ModelXIAOMI NOTE-7
2AndroidMIUI Global 12.0.1
3Camera ApkDSLR CAMERA
3EditPhotoshop Express
4Original Picture@muhamad.dhoank
5LocationKota Bogor

Those are my activities that I try to write down, I hope my blog this time gets the attention and support of all the @steem.sea team.
Thanks to @steemcurator08 @inwi @anroja @ernaerningsih, @radjasalman @el-nailul @muzack1 @steem-indonesia @puncakbukit @steem.sea @green07 @curiesea @nazarul
and don't forget to @steemcurator01 and @steemcurator02 @steemcurator03 @booming @booming1 @booming3
I thank you for visiting, please leave messages, criticisms and suggestions because it is an encouragement for me to continue working.
Greetings from us steemian The Rain city steemit community. Bogor City Special thanks to my friends steemian The Rain city steemit community such as:
@alhasan @elsistrisetiawan @muldoang

Warm greetings from me @muhamad.dhoank and my wife @rohmayati94

PSX_20210119_010538.jpg

signbot (1).gif