Tutorials carved sandal logo S.S.Lazio

In making a snapshot image in flip-flops, the required tool is

1. Mechanical pencil and eraser to draw on slipper

2. Cutting Pen for slicing

3. Tweezers to lift the part that will dicuck.

Well the process is actually easy:

1. Stay us what image we want on sandals by using a mechanical pencil.

2. Then slicing it with cutting pen and lifting it with tweezers.

3. Done!

Then how can the results be good and detail? Yes done patiently. Just like the tutorial, easy is not it?

Create more PRO

First is to prepare the logo design and fonts on the computer. Usually still inPath first in the form of vector into Corel Draw, then adjust the size with the sandal area. Usually for the right size, portrait flip-flops from the top, then transfer the actual size scale into the computer. After that design your logo set on the picture of the sandals to see the level of visibility from various sides.

The image is then mirrored (reversed) and then printed.

Why should the picture be reversed? How to get the design drawings delivered from the computer onto the surface of the sandals? Later you will know the answer.

Once in-print, arrive to a fairly difficult process and requires patience, namely how let the printed image can move into the sandals. What needs to be prepared is Boxy or Drawing Pen Snowman size 0.1 and the clear book cover (plastic tanning). Put the clear cover to the printed image, then tape the edges so as not to shift its position. Then start the duplication or create the mall with in-blat using boxy.

After the process is finished, lift the plastic cover and cut it to get the mall.

Prepare paper tape, and neatly wrap on the surface of flip-flops.

Then turn the mall's plastic cover up, so that the reversed image becomes invisible again and the boxy stroke position is below. Paste, then set its position. Masking tape at the edges so as not to shift

After that rub all the outline lines of the boxy results with a mechanical pencil. Well, later in boxy ink from the cover will move to masking tape. Make sure all the lines are already rubbed.

Lift up the plastic cover, and voila! Lazio logo has been delivered to the sandals. Well, now already know the answer?

It turns out to be hard for mindahin design images from computer to sandals. Next, it's time Slice and Dice Spud!

finished, thanks for reading and good luck guys, sorry with the small picture quality, because it is taken with camera phone that has low pixel. @pinguart