Maintaining your RO plant is not a magic

in #steemexclusive2 years ago (edited)

Having a RO plant Reverse Osmosis water purifier for North Central people is an asset. Most of people think about the maintenance of the plants but not the privileges. Maintenance of the plants are simple if you do the correct preventive maintenance in time. Its only a routine work.

IMG_20210618_182412.jpg
10 litres per hour domestic water purifier in operation

This is a domestic type Reverse Osmosis plant (RO plant) with capacity of 10 lpm.
To get the basic idea of components just mentioned the main components below.

1.0 PP filter
2.0 Granular active carbon filter
3.0 Carbon block filter
4.0 Booster pump
5.0 RO membrane
6.0 Post active carbon filter
7.0 Mineral bowl

IMG_20210618_193421.jpg
TDS value of the pipe born water
232 is within WHO standards but difficult to drink much

IMG_20210618_182724.jpg
TDS value after filtration
Total dissolved solids reduced from 232 to 3 after adding minerals

Poly propylene filter is the first stage filter which is mainly needed weekly maintenance. It could be effectively remove solid substances like water rust, phosphor pollution and sand . Applying pressurised water cleans the filter. It's a very simple work.

IMG_20210618_180254.jpg
Pressurised water remove the blocked particles of the filter

Second and third stage of filters are Granular activated carbon filter & active carbon block filter, which are easily absorb the residual Chlorine, odour, smell and other substances in water.
Those two filters needed cleaning once a month. It is also a simple cleaning process using water .
IMG_20210618_180309.jpg

Cleaning of this filter improves the quality and taste of purified water.

The fourth stage filter is the most expensive one. It is the RO membrane which removes bacteria, viruses, heavy metals, salt and other harmful substances in the water. If we properly maintain initial stage filters' life time of the RO membrane extends up to three years.

IMG_20220304_124729.jpg

Different brands of RO membranes for RO plants

Only we need to replace filters if the following issuesj appears.
1.0 water filtration process too slow or too quick.
2.0 Taste is not so good.
3.0 Smell in water.

IMG_20210618_175432.jpg
Difference between before and after of cleaning PP filer

Coin Marketplace

STEEM 0.29
TRX 0.12
JST 0.032
BTC 63645.37
ETH 3067.90
USDT 1.00
SBD 3.81