Hello steemians I’m here again @calmabryanree27 in tutorials.

Today, I am going to give an information on how to measure the value of an inductance using digital LCR meter.

Objective:

1. To know how to measure the inductance of an inductor.

Materials:

1. Digital LCR Meter
2. Inductors
3. Breadboard

Key Terms:

1.The Digital LCR Meter

Definition: It is an electrical measuring device that measures the value of impedance, resistance, inductance and capacitance.
See attached photo below

Own photo

2.Inductor

Definition: It is an electrical passive element that plays special rule and function in a certain circuit. The inductor stores energy in the form of magnetic field and most of electronic device functions properly with the help of an inductor. The values of this inductor must be determined before using it in a certain circuit.
See attached photo below

Own photo

So, measuring its values is very important most especially for inductors in which the values cannot be seen in its body or on the inductor itself.

Below are the step by step procedures on how to measure the inductance of an inductor.

Step 1: Place the Indcutor on the breadboard for the simplicity of the job.
See attached photo below

Own photo

Step 2: Turn on the Digital LCR Meter by pressing the power button as below.
See attached photo below

Own photo

Step 3: Set the LCR meter to Inductance mode by pressing the ZLCR button.
See attached photo below

Own photo

Step 4: Connect the two test probes of LCR meter to the leg terminals of the first inductor (Note: Inductors do not have polarity). Then record the reading of the LCR meter.
See attached photo below

Own photo
The reading of the LCR METER is 2.865 millihenry

Step 5: Connect the two test probes of LCR meter to the leg terminals of the second inductor (Note: Inductors do not have polarity). Then record the reading of the LCR meter.
See attached photo below

Own photo
The reading is 2.634 millihenry

Sources:

1. Handheld digital LCR meter
2. Personal Cellular phone

Thank you!

Hope you find it helpful steemians. Follow me for more tutorials.