I did check it with a multimeter and I wasn't getting any voltage out of the pins that supplied the heat bed, even though the display had changed on the LCD to let me know it recognized there was a heat bed attached. The only thing I can think it could be is some part of the circuitry has blown.

I did look into getting a mofset, but since there was no current coming through the pins it would be pointless to do so. I may try and replace the component that appeared to broken on my board at some point, but I have been primarily tinkering with the taranula.

My understanding of DC PCB components is not brilliant. I work with AC, but many of the DC components appear to be of similar function.