New Experiment: Dynamic Casimir Effect - with Coded Magnets!

Readers will need quite a bit of context for this complex article and an introduction to some advanced concepts. My articles tend to lead down branches of rabbit holes.

There are a lot of misconceptions about the Casimir Effect and the mechanism of how it arises. There is no pulling force involved whatsoever. The plates are pushed together from the outside. Not pulled together from the inside.

The Casimir Effect can be explained without need for "zero point energy", without need for space-time curvature or aether or dark matter. Just plain ol' radiation pressure (or a cancellation thereof) within 3D Euclidean space.

I have some of the most heretical views, and I speak from a radical departure from both Relativity and Quantum Theory. My interpretations stand on their own legs with internal consistency and mathematical proofs under classical physics without need for a particle-wave duality. But modified classical physics under a variable model for the velocity of light. Thus "Galilean Variance" as opposed to Lorentz invariance.

What is the Casimir Effect?
The Casimir Effect is an experiment originated by Hendrik Casimir.

The effect was first seen when 2 conductive but uncharged plates like aluminum or steel are placed parallel extremely close together and in a reduced atmosphere (so called vacuum).

The gap between the plates correlates with a wavelength of electromagnetic radiation, which then cancels out that particular wavelength. Now there is more pressure and wavelengths on the outside of the plates than the inside; therefore, the plates are pushed together... equalizing the pressure. It requires external energy to separate the plates again.

There is an analog version of the Casimir effect dealing with ships docked at a harbor. The gap between the hulls of the ships can cancel out some of the ocean waves/capillary waves at the surface of the water. Which results in more pressure and more waves on the outside of the gap than the inside... therefore, the ships are pushed together and clash. No zero point energy needed. Just a cancellation of existing pressure in any form.

Here are a couple papers with links from the American Journal of Physics regarding the analog tests of the Casimir Effect and other tests:
https://wucj.lab.westlake.edu.cn/Others/Casimir_effect.pdf

But electromagnetic radiation is not "made of" capillary waves nor does it behave like rippling water or condensed matter. That is a false analogy/ "oversimplification" (lie) that continues to mislead the world. Like the double slit experiment visualizations peddled by "What the Bleep Do We Know" or "Flatland". There are four different experiments which yield four completely different results that have nothing to do with each other.

Double Slit Illusion/ Fallacy:
https://x.com/TheRealVerbz/status/2022172974472974598?s=20

QED was born from the notion that the velocity of light is invariant. Meaning it never shifts. But... as Einstein himself wrote in a letter to Erwin Finley-Freundlich in August of 1913:

"Wenn die Lichtgeschwindigkeit auch nur ein bißchen von der Geschwindigkeit der Lichtquelle abhängig ist, dann ist meine ganze Relativitätstheorie und Gravitationstheorie falsch."

"If the velocity of light is even a little bit dependent upon the velocity of the light source, then my ENTIRE theory of Relativity and theory of Gravitation is false."

It turns out, the velocity of light is indeed dependent upon the velocity of the light source. So I attack the legs of relativity and that self-admitted Achilles heel of Einstein. If the velocity of light shifts in different frames of reference... then all of the current explanations of the Casimir Effect goes out the window... as does the Big Bang, space-time much of QED and all of the core tenets of relativity.

Here is are two more posts about the fallacies of quantum theory.

The 4th Law of Thermodynamics:
https://x.com/therealverbz/status/2018115757822075034?s=46&t=JhcGFRVj667kIEx6GxtHvg

The Misconception of Kirchhoff's "Law":
https://x.com/therealverbz/status/1987194179408257103?s=46&t=JhcGFRVj667kIEx6GxtHvg

"Space" is indeed empty.
People are terrified of zero and emptiness.

There is an article about the Casimir Effect from 1988 that specifies the Casimir plates are pushed together from the outside. The mechanism is explained through a cancellation of existing radiation pressure.

I don't think the Casimir Effect would take place in the depths of the void between galaxies at around 2.7 Kelvin because it requires existing pressure to generate that force. All of the tests for the Casimir Effect have been conducted within Earth's atmosphere... within the solar system... within the galaxy. So of course there will be an effect because there is plenty of condensed matter to push off and pressure built up.

I take "zero point energy" as being the lowest energy state possible of electrons in the deepest void at levels just above absolute zero. Any energy levels higher than that is not zero point by definition. And Earth is already immersed in energy levels way above 2.7 K, therefore, the Casimir Effect is not zero point energy at all.

Zero point energy is the lack of harvestable energy. You need a difference in energy states to yield an effect. If you are at the lowest energy level already... you can't generate thrust since there is no difference in energy to equalize (which is the mechanism for the plates to move).

Space is just another word for "distance". The void describes the literal lack of stuff and particles. The energy between particles is no "made of" anything. If there are no particles occupying a given volume of space... that space is EMPTY... despite there being an all pervasive energy.

But this is just talking about static tests. A stationary Casimir experiment where 2 conductive but uncharged plates are placed parallel in a reduced atmosphere (so called vacuum). They push together from external stimulus.
You still have to pull the plates apart with external energy. You cannot "perpetually" generate energy from the Casimir Effect... regardless of what "Sonny" White and others claim with their little microchips...
.. let alone scale that effect up to power houses and 3 phase appliances...

Wishful thinking would be a gross understatement. We are ultimately after coherent electron pairs... but that is another article/book (series).

So, now I'll briefly mention the Dynamic Casimir Effect and then separately demonstrate coded magnets before introducing newer/ even more complex experiments to combine those things.

The dynamic casimir effect requires a constant change in relative motion between 2 mirrors/plates. All of the examples of the dynamic casimir effect (DCE) seem to show a lateral movement of one mirror in relation to another mirror. Springing back and forth to change the distance of the gap and generate a vibration between the two mirrors.

The current (and esoteric) explanation is that the process generates "virtual photons". But virtual photons are not literal or real. That again is an artifice that only exists on paper as a mathematical consequence of Lorentz invariance and quantum theory. But it's taken as literal in physical reality.

The process can generate actual emissions of electromagnetic radiation (photons). It's the electrons making up the surface of the plates/mirrors that emit/re-emit at a constant to generate the photons. There's nothing "virtual" about it. External energy is being applied to make the mirror move back and forth...
the energy in = energy out + loses, (∑ E_in = ∑ E_out + losses) but the constant back and forth of the mirrors mimics the rising and falling of the electrons themselves in relation to the other mirror which yields an emission relative to the two disparate states. From the condensed matter making up the mirrors themselves. Not from "the vacuum" or space or void or from the lack of stuff between the mirrors.

Actual emissions of photons can arise from the difference in relative motion at a constant between two objects at high enough frequencies. Not from the vacuum between the walls... but from the electrons making up the walls themselves.

That relative motion is normally a back-and-forth reciprocating action. Like a vibration or a spring. But that changes the distance of the gap at a given frequency/rate as well. I say the emission of photons can also be achieved at a constant relative velocity while maintaining the same gap size. But that requires a modified set up using aligned spinning cylinders rather than parallel flat plates.

This two part article I put together will provide much needed context to what the Searl Effect Generator (SEG) is and why the "mock up" demonstration units are significant.

What is the SEG Mockup? Part 1
https://x.com/TheRealVerbz/status/2014434803823870215

What is the SEG MockUp? Part 2
https://x.com/TheRealVerbz/status/2014446423618863569

In those articles, I demonstrate the simultaneous attraction and repulsion of the orbiting roller. And that gap can be adjusted or maintained at a constant.

The combination of magnetic attraction with eddy current repulsion makes for a magnetic bearing and stable gap. Like a magnetic cushion. Like how the Mag-Lev train levitates above the track. (A linear motor) But instead of a straight track, it's wrapped in a ring. (So, a non-linear motor).

In that demonstration above, there is just a spinning mass of copper. An NdFeB magnet is placed over the spinning OFHC copper ring. Due to Lenz Law, the eddy currents generated by the copper, the forces oppose the axially magnetized 1" diameter cylinder magnet causing it to levitate above the copper. As the rotation of the copper mass is slowed down, the magnet slowly lowers back down. Analogous to a cooled YBCO superconductor and magnet levitating over one another. But at room temperature.

For the newer dynamic Casimir effect I'm proposing, we need the cylinders to levitate and spin. In that demonstration above, the NdFeB magnet has no torque and it's just levitating without spinning on its centripetal axis. That is because the Bloch wall is a vertical "flat line". That plane that "separates" the North pole from the South pole of a magnet is like the flat wall shared by two connected soap bubbles. That can be altered and manipulated to geometric perfection. Like combining cymatics with magnetization. And it's the superimposed interference which creates an emergent AC subcarrier once in rotation.

That magnetic waveform is the reason why the components levitate and spin in the presence of eddy currents at room temperature, or below critical temperatures for superconductivity.

It's the long range attraction of the magnetic field combined with the short range repulsion of the eddy currents which make for a stable gap. And that gap can be adjusted to the micron by engineering the density of the magnet, the proportions of the materials making up the magnet, in relation to the strength of gauss, the rpm at which the eddy current effect takes place between a given mass of diamagnetic material in motion... and more factors.

And that magnetic waveform can result in serious torque and spin.
The waveforms can also perform work and generate electricity.

The peak of the rotation for a given mass of magnet with a given gauss and magnetic waveform happens to be the closer you can get to the surface of the stator ring.

And that strongest point of rotation just so happens to correlate with the Casimir limit to generate exotic effects, microwave radiation and photons of different wavelengths/frequencies, anomalous locking effects, and more.
Micron-level gap adjustability is a game changer. And that is how the exotic effects would arise. Where the stable, parallel gap between rollers and stator would get closer and closer to the regime where radiation pressure and Casimir-like effects would begin to become measurable and observable... while simultaneously generating electricity.

But to achieve that remotely will require modifying the setup a bit and introducing the concept of coded magnets.

Simulating Monopoles and Halbach Arrays and other experiments:
https://x.com/TheRealVerbz/status/1902041298116472985

The "standard" static Casimir measurements seem to work best in the 0.1µ to 10µ range. A sweet window might be from the sub micron level to up to 5µ.

So by creating a stable magnetic gap/cushion, the effect can be achieved at a constant, with the components orbiting and spinning in the same direction as one. And because the frame of reference is changing at a constant, it's as if there is a constant cavity between the smaller moving parts and the stator ring. That cavity can be dynamically modulated and made to undulate by introducing ultrasound or acoustic vibration, for a frequency sweep of Casimir effects while in rotation at a constant. Bouncing towards and away from the wall of the stator on one plane while orbiting and spinning.

I take the magnetic waves imprinted on the components of John Searl's SEG as being similar to the physical ridges of a butterfly wing. Like a magnetic interference pattern out of the Bloch wall.

Look into how a butterfly wing (ridges) interacts with light (photons) and entertain the notion that magnetic waves (ridges) and electricity (electrons) might interact in an analogous manner. In the regard that "electron" behavior around normal magnets can be compared the random motion of photons from an incandescent white light; whereas, the behavior of "electrons" in the SEG act more like the photons in a specifically colored laser beam or from a monochromatic source. Also look into the term "coherence" in relation to physics.

Magnetic Waveform Thread:
https://x.com/therealverbz/status/1879732876956299512?s=46&t=JhcGFRVj667kIEx6GxtHvg

Many people don't know that the father of the Mag-Lev train, Eric Laithwaite, was very interested in photonics, crystals and the geometric array of butterfly wings and the elytra of bugs.

Geometry = Order
Coherence = Order

I was extremely interested in the World Science Fair specifically for this demonstration that I read about and a couple others. Around that time, I was the first person to acquire a couple sets of coded magnets from what was originally known as Correlated Magnetics Research (CMR). They have since changed their company name to PolyMagnets. Ever since President Obama visited their facility in Huntsville, Alabama during his first term, the company stopped entertaining public inquiries and their magnetic demonstration sets were no longer available for quite some time. They only deal with military contracts and high level investments at this point. When people see the validity of a nascent technology, they are amazed and want to jump all over it, as long as you have justification to support it.

Coded magnets first arrived on the scene around 2008 to 2010. I was one the first people to inquire about the coded magnets and the first to publicly acquire them. I downloaded all of their 120 patents they had at the time, which I image have grown considerably in number by now. I diligently studied the magnets and tried back-engineering them for a year and a half before making a video about them in 2010 called “Geometrically Coded Magnets Behave Differently.” YouTube deleted the video saying it qualified as “medical misinformation” so I had to re-upload it to Rumble and other platforms that don’t purposefully censor information completely unrelated to medicine.

Geometrically Coded Magnets Behave Differently:
https://rumble.com/vbs3ad-extraordinary-advancements-in-magnets-jason-verbelli.html

For years, naysayers and deniers said, "coded magnets are fake", "impossible”, etc. Don't hear too much from those people anymore for some reason. Even after demonstrating the functionality of the magnets, showing the magnetic imprinting patterns with a viewing film... didn’t matter. People laughed and called me an idiot amongst other things. All in a day’s work on the internet. But I kept providing substantiation... and for some strange reason, some of the people started deleting their original comments falsely accusing the video of being fake. Because they didn’t want to look the fool after seeing the majority opinion shift over time that it was genuine.

Coded magnets behave differently. You can program the magnets to have different functions. Using a 2mm print head as a magnetization yoke, (connected to a circuit and other equipment), the company called CMR/PolyMagnets blasts a small local area of a magnetic material with high capacitive discharge to make tiny poles. They can make images and shapes out of the connecting Bloch walls. This can result in unique locks, magnets that attract from far away, but repel up close up, magnets that repel far away yet attract close up, and magnets that equalize forces in other weird ways.

Smarter Everyday visits PolyMagnets:

I quickly learned how much power it required. So I had some friends attempt it with larger equipment than I had at my house. Those other successful attempts are in the embedded video below called Extraordinary Advancements in Magnets.

People have tried to simulate the effects of CMR's magnets by combining different sized and strength magnets together in Halbach arrays and other inventive combinations.

But all of the above mentioned is still dealing with conventional magnetization. Meaning, no consideration of frequencies and it’s still like hammering the magnetic material with high capacitive discharge to saturate it and get "a magnet." But CMR/ PolyMagnets is doing it in dots/ magnetic pixels called "Maxels", named after Maxwell. It's like a bunch of tiny magnets together within the same material. Unique, but still not magnetic waveforms.

Extraordinary Advancements in Magnets:
https://rumble.com/vbs3ad-extraordinary-advancements-in-magnets-jason-verbelli.html

SEG Magnetics, Inc. will get more acknowledgement once the world realizes the significance of magnetic waveforms. It’s a completely revolutionary approach to magnetization unlike any commercial process out there. Even the imprinting of Maxels is conventional in comparison to what we accomplish at SEG Magnetics. Being able to achieve locking effects without need for liquid nitrogen using magnetic waveforms and eddy currents (and other emergent properties that simulate a Bose-Einstein condensate or superconductive systems.)

The main idea of this article regarding a New Dynamic Casimir Experiment with Coded Magnets is that the long range attraction and short range repulsion can be used in tandem to create a stable adjustable gap between plates affixed to those coded magnet pairs.

By vibrating the assembly, it pushes the plates together at even coherent intervals to produce the dynamic casimir effect. But... instead of flat plates, we will use vertically oriented cylinders with gaps between them. The smaller cylinders are orbiting around a larger cylindrical stator ring. But the larger ring is spun in the center with the stationary/ fixed coded magnet plates with the gap between the larger spinning ring and the other smaller rings around the periphery.

In addition to that... the smaller cylinders rotate on their centripetal axis and can be adjusted as well like a planetary gear. So the relative motion/orbit around the spinning ring can be adjusted. The centripetal spin of the smaller cylinders can be adjusted. The gap between the larger ring and smaller rings can be adjusted at a constant gap in addition to vibrating them at a given intensity to produce a dynamically changing gap. No zero point energy involved in the interpretation or mechanism.

The assembly will be more like what Morningstar Energy Box built with a central large ring that spins with fixed rollers around the periphery on bearings that can allow them to spin freely on their centripetal axis.

Morningstar Energy Box on Alt Propulsion:
https://www.altpropulsion.com/the-morningstar-energy-box-searl-effect-and-poynting-vortex-gravity/
An Unusual Electromagnetic Device:
https://drive.google.com/file/d/1QwZf78U_f8TmWQJ0zcae8PkcsExRPXnC/view

More modifications would be needed to allow for a variance of a few microns toward and away from the center ring. And a few other factors that would require funding and support from like-minded mad scientists.
Static Casimir ForceRelativistic / QED View
Plates are “attracted” by vacuum "zero-point energy".
Restricted modes between plates makes for net vacuum pressure.
F = – (π² ħ c A) / (240 d⁴)
(ħ = reduced Planck’s constant, c = invariant)

Galilean Variance View
Plates are pushed together by external ambient radiation pressure.
Gap cancels wavelengths λ > 2d from the existing surrounding spectrum.
ΔP ≈ ∫ [ (π² kT⁴ / (45 ħ³ c³)) × cutoff(d, λ) ] dλ
(c' = c ± v, source-dependent) (more info after comparisons)
Net external momentum transfer on outer surfaces.
Dynamic Casimir Effect - Relativistic/ QED View
Rapid boundary motion converts "virtual photons" to real photon "pairs".
ω₁ + ω₂ ≈ 2π f_mod (typically at f_mod / 2)
Energy interpreted as extracted from vacuum fluctuations.

Galilean Variance View
Vibration + spin + orbit creates coherent re-emission from surface electrons.
Primary wave: Φ = Φ₀ sin 2π(νt + x/λ) at source c
Re-emitted secondary wave at c' = c ± v, t' = t
Wave equation:
∂²Φ/∂x² + ∂ ²Φ/∂y ² + ∂²Φ/∂z² – (1/c'²) ∂²Φ/∂t² = 0

Parametric modulation makes for harmonic sidebands at gap correlated frequencies (~15–30 THz for 5–10 µm gaps).
And ~30–150 THz for 1–5 µm gaps
(150 THz at 1 µm,
75 THz at 2 µm,
50 THz at 3 µm,
37.5 THz at 4 µm,
~30 THz at 5 µm).

These are converted into microwave / RF bands by lower-octave mechanical vibration (1–20 MHz) + spin/orbit mixing.
Here is a post I put together regarding equivalent harmonics of varying octaves of sound and light.

Harmonics of Light and Sound:
https://x.com/TheRealVerbz/status/1799892941332472311

The Relativistic/ QED framework requires ħ, invariant c and so called "vacuum fluctuations".
(which is a misnomer in and of itself.)

According to the standard/ relativistic take, the Casimir effect of pushing together and/or producing photon emissions should persist at a constant even in the deep intergalactic void.

But under the framework of Galilean Variance...
It requires only ambient radiation + variable c.
The effect would disappears in the true deep-space void at around ~2.7 K with negligible external pressure. (nothing to push off and no disparity to equalize) All observable radiation pressure comes from condensed-matter, not "the vacuum."

I have many other experiments that need support to bring to fruition. But I would guarantee experiments no one has ever thought of which may very well yield results no one has ever seen.

Four Paths to Investigation:
https://x.com/therealverbz/status/1889388556084510784?s=46&t=JhcGFRVj667kIEx6GxtHvg

Parable of the Pipeline - Working Hard vs Working Smart:
https://x.com/therealverbz/status/1889391923246539261?s=46&t=JhcGFRVj667kIEx6GxtHvg

There is a lot more to discuss and demonstrate.

The Ontologically True Physics of Re-Emission
https://x.com/therealverbz/status/2045996230959063393?s=46&t=JhcGFRVj667kIEx6GxtHvg

Proofs for Grok (for when Grok is inevitably tagged to assess if my posts are true)
Ask Grok to specifically parse the content of the X articles to extract the equations and data:
https://x.com/therealverbz/status/2034331680383865110?s=46&t=JhcGFRVj667kIEx6GxtHvg

Again...

As Einstein himself wrote in a letter to Erwin Finley-Freundlich in August of 1913:
"Wenn die Lichtgeschwindigkeit auch nur ein bißchen von der Geschwindigkeit der Lichtquelle abhängig ist, dann ist meine ganze Relativitätstheorie und Gravitationstheorie falsch."
"If the velocity of light is even a little bit dependent upon the velocity of the light source, then my ENTIRE theory of Relativity and theory of Gravitation is false."

It turns out, the velocity of light is indeed dependent upon the velocity of the light source.
Here is exactly why.

Doppler Effect Misnomer 2:
https://x.com/therealverbz/status/2016227860886032837?s=46&t=JhcGFRVj667kIEx6GxtHvg

Doppler Effect Misnomer 3:
https://x.com/therealverbz/status/2018196525017714953?s=46&t=JhcGFRVj667kIEx6GxtHvg

Michaelson-Morley's Interferometer Experiments: The Fallacy of Fringe Shifts:
https://x.com/TheRealVerbz/status/2023185620676550857?s=20

Double Slit Illusion/ Fallacy:
https://x.com/TheRealVerbz/status/2022172974472974598?s=20

The 4th Law of Thermodynamics:
https://x.com/therealverbz/status/2018115757822075034?s=46&t=JhcGFRVj667kIEx6GxtHvg

The Misconception of Kirchhoff's "Law":
https://x.com/therealverbz/status/1987194179408257103?s=46&t=JhcGFRVj667kIEx6GxtHvg

Thank you for your time and interest.

Respectfully,
Jason Verbelli

https://galileanvariance.com
(Website will be done getting overhauled next month)