My Artwork - Printmaking and Laser Cut Series

A bit about my process, for those unfamiliar with printmaking...

For each print, I used two pieces of paper. One had a circle already laser cut out, the size of where the ink stops on the final prints. I taped that paper to a full sheet to block ink from printing outside that pre-cut circle shape. I built up my layers, applying ink to a plexiglass sheet, before running the taped together papers through the press. After I was satisfied with the results, I detached the stencil paper and put the printed image in the laser cutter to cut the outer circle and the lettering at the bottom.